Now, let's see how does the sticker heat transfer on clothes?

Generally speaking, heat transfer hot stamping is a simple printing process, easy to operate, the required materials are economical and easy to obtain clothing processing technology.

Its principle is using the heat transfer machine after high temperature pressing, and then transferred to the clothes. 

This technology can be widely used in a variety of substrate, such as T-shirts, hoodies, denim, shoes, backpacks, various nylon hats, etc.

The specific operation process is as follows:

1. Material preparation

1 piece of clothing to be pressed; 1 hot stamping, 1 pair of scissors.

2. Manual operation

Shear the stickers.

3. Machine preparation

Make the machine thermostats and timers of the pyrography, adjusted to the required temperature and time, generally to 150℃ temperature, pressure for 10 seconds.

4. Machine operation

Put the substrate on the silicone plate of the hot stamping machine, and then cut the hot stamping flat on the hot stamping, press down the hot stamping machine. When the indicating hot stamping time is over, pull up the hot stamping machine again.

5. Late removal:

The removal of waste is an important process, is also a link to check the quality of hot stamping film.

In addition to the waste cold tear, such as cooling, before the hot stamping paper tear off; There are also hot tearing, hot stamping after the need to immediately remove the hot stamping paper.

6. Operation completed!